Nhà sản xuất

26 Series Fittings

Parker 26 Series NPTF Pipe Crimp Fittings

Use with the following Parker Hose Series:

201206213221FR225244266285293, and SS23CG.

 

Parker 26 series fittings (hose ends) are engineered to work with select Parker transportation and refrigerant (AC) hoses. These hoses’ inside diameters (ID) are sized smaller than a typical hydraulic hose. The dash sizes of these hoses refer to a nominal hose ID size and not the actual size. For example, -4 size would normally designate a 1/4” ID but in this case, the actual ID is 3/16”.

Because fittings are sized to fit the hose ID, the 26 series fitting sizes for the hose end of the fitting are not the actual measurements but nominal size – just like the hose they are designed to work with. For example, 10126-2-4 fitting is 1/8” on the pipe thread end and 3/16” (nominal -4 size) on the hose end.

Confusing? Just remember to match the dash size of the fitting to the dash size of the hose.  Refer to our technical pages for more information on correct hose assembly selection and fabrication.

 

Parker 10126 Series Crimp Fitting

Male NPTF Pipe – Rigid

Parker 26 series male rigid pipe crimp fitting

How to order:

Visit any of our stores, call us, fax/e-mail us or use the form on this page (Fast Answers).

 

TIP:  The numbers after dashes in each part number tell you the size of each end of the fitting. The number after the first dash indicates the size of the thread, the number after the second dash indicates the size of the hose end.

Part
Number
Thread ID
in
HoseI.D.
in
A H B Available in Brass
in mm in mm in mm
10126-2-4 1/8x27 3/16 1.65 42 7/16 0.78 0.78 20  
10126-4-4 1/4x18 3/16 1.88 48 9/16 1.01 1.01 26  
10126-4-5 1/4x18 1/4 1.88 48 9/16 1.01 1.01 26  
10126-4-6 1/4x18 5/16 1.88 48 3/4 1.02 1.02 26
10126-6-6 3/8x18 5/16 1.89 48 11/16 1.03 1.03 26
10126-6-8 3/8x18 13/32 1.89 48 11/16 1.03 1.03 26
10126-8-8 1/2x14 13/32 2.14 54 7/8 1.28 1.28 33
10126-8-10 1/2x14 1/2 2.25 57 7/8 1.30 1.30 33
10126-12-12 3/4x14 5/8 2.31 59 1-1/16 1.37 1.37 35
10126-16-16 1x11-1/2 7/8 2.61 66 1-3/8 1.57 1.57 40  
10126-20-20 1-1/4x11-1/2 1-1/8 2.83 72 1-3/4 1.77 1.77 45  
10126-24-24 1-1/2x11-1/2 1-3/8 3.01 76 2 1.93 1.93 49  
10126-32-32 2x11-1/2 1-13/16 3.44 87 2-1/2 2.18 2.18 55  

Parker 26 Series JIC Crimp Fittings

Use with the following Parker Hose Series:

201206213221FR225244266285293, and SS23CG.

 Parker 26 series fittings (hose ends) are engineered to work with select Parker transportation and refrigerant (AC) hoses. These hoses’ inside diameters (ID) are sized smaller than a typical hydraulic hose. The dash sizes of these hoses refer to a nominal hose ID size and not the actual size. For example, -4 size would normally designate a 1/4” ID but in this case, the actual ID is 3/16”.

Because fittings are sized to fit the hose ID, the 26 series fitting sizes for the hose end of the fitting are not the actual measurements but nominal size – just like the hose they are designed to work with. For example, 10126-2-4 fitting is 1/8” on the pipe thread end and 3/16” (nominal -4 size) on the hose end.

Confusing? Just remember to match the dash size of the fitting to the dash size of the hose.  Refer to our technical pages for more information on correct hose assembly selection and fabrication.

Parker 10326 Crimp Fitting

Male JIC 37° - Rigid

Parker 26 series 10326 crimp fitting

For available sizes, refer to the table below. 

 

 

Part Number Thread Hose ID A H B Additional Materials
in in in mm in mm in mm Brass
10326-4-4 1/4 7/16x20 3/16 2.02 50 1/2 1.15 1.15 29
10326-6-6 3/8 9/16x18 5/16 2.12 54 3/4 1.26 1.26 32
10326-8-8 1/2 3/4X16 13/32 1.94 49 13/16 1.08 1.08 27
10326-10-10 5/8 7/8X14 1/2 2.49 64 15/16 1.54 1.54 39
10326-16-16 1 1-5/16x12 7/8 2.79 71 1-3/8 1.75 1.75 44  

 

Parker 10626 Crimp Fitting

Female JIC 37˚ - Swivel 

Parker 26 series 10626 crimp fitting

For available sizes, refer to the table below. 

 

Part Number Thread Hose ID A W B Additional Material
in in in mm in in mm Brass
10626-6-6 3/8 9/16x18 5/16 1.81 45 11/16 0.95 23
10626-6-8 3/8 9/16x18 13/32 1.67 52 11/16 1.19 30
10626-12-12 3/4 1-1/16x12 5/8 2.29 58 1-1/4 1.35 34
10626-16-16 1 1-5/16x12 7/8 2.53 64 1-1/2 1.49 38
10626-20-20 1-1/4 1-5/8x12 1-1/8 2.56 65 2 1.50 38
10626-24-24 1-1/2 1-7/8x12 1-3/8 2.77 70 2-1/4 1.69 43  
10626-32-32 2 2-1/2x12 1-13/16 3.30 84 2-7/8 2.04 52  

 

Parker 13726 Crimp Fitting

Female JIC 37˚ - Swivel - 45° Elbow - Short Drop

Parker 26 series 13726 crimp fitting

For available sizes, refer to the table below. 

 

Part Number Thread Hose  ID A E W

SEALTECH VIETNAM

GIỎ HÀNG

LANGUAGE

FANPAGE

HỖ TRỢ TRỰC TUYẾN


HOTLINE
ĐT: 0949 265 720
Email: info@sealtech.vn

Ms. Nhi
ĐT: 0913 914 018
Email: nhi.nguyen@sealtech.vn

Mr. Long
ĐT: 0918 834 615
Email: long.nguyen@sealtech.vn

LƯỢT TRUY CẬP

Đối tác