Nhà sản xuất

VALQUA UF300

Mã sản phẩm: VALQUA UF300
Sản phẩm đã bán:
Phí vận chuyển: Tính phí khi thanh toán
Mô tả ngắn
This is a Sheet Gasket that can be used for the widest variety of fluids, and different applications are not required for acid or alkali fluids. It is effective for promoting gasket integration at a p
 Hỗ trợ trực tuyến

Hotline/Zalo/Viber: 0946 265 720

VALQUA No. UF300

 

UNIVERSALHYPER™

This is a Sheet Gasket that can be used for the widest variety of fluids, and different applications are not required for acid or alkali fluids. It is effective for promoting gasket integration at a plant where both alkali and acid lines exist. This is a product that possesses high-temperature reliability equal to that of other High-performance Non-asbestos Sheet Gaskets (GF300, for example), thereby possessing both chemical resistance and high-temperature reliability.

 

Description

 

Suitable fluids Water, seawater, hot water, steam, air, acid (includes strong acid), alkali (includes strong alkali), salt aqueous solution, oils, alcohol, aliphatic solvent and its vapor, and various types of gas, etc.
Unsuitable fluids Polymerizable monomer,toxic gas
Applications Joint sections of cover flanges and nozzles and the like for pipe flanges, valve bonnets, towers & tanks, ovens, pressure vessels and heat exchangers used in various factories including power stations, oil refineries, steel plants and shipyards
Main Component PTFE, silicon carbide
Color/Print Gray / Blue

Design Data

  • Allowable ranges
    Temperature and pressure classifications show individual service limits.

     

    Temperature (°C) Pressure (MPa)
    -200~300 3.5
  • Dimensions
    Thickness (mm) Size (mm)
    1.0 1270×1270
    1.5, 2.0,3.0 1500×1500
  • Design Criteria
    The values for Compressed Non-asbestos Fiber Sheets defined in Appendix G to JIS B 8265 can be applied to m and y values of High Performance Non-asbestos Sheets.

     

    Thickness
    (mm)
    Gasket factor
    “m”
    Minimum design seating stress
    “y”(N/mm2)
    3.0 2.00 11.0
    1.5 2.75 25.5
    1.0 3.50 44.8
  • Recommended Tightening stress(MPa)

The recommended tightening stress is the pressure required under standard conditions without consideration to the endforce due to internal
fluid. It is the stress on the contact area of the gasket

Fluid Recommended tightening stress (MPa)
Liquid 25.5
Gas 35.0

Stress strain characteristics of High Performance Non-Asbestos Sheet 
(Dimension of test piece:JIS 10K 25A t =1.5mm)

www.sealtech.vn

Seal ring D-FKM-DN200
Seal ring D-FKM-DN150
Seal ring D-FKM-DN125
Seal ring D-FKM-DN100
Seal ring D-FKM-DN80
Seal ring D-FKM-DN75
Seal ring D-FKM-DN65
Seal ring D-FKM-DN50
Seal ring D-FKM-DN40
Seal ring D-FKM-DN32
Seal ring D-FKM-DN25
Seal ring D-FKM-DN20
Seal ring D-FKM-DN15
Seal ring D-FKM-DN10
Seal ring D-PTFE-DN200
Seal ring D-PTFE-DN150
Seal ring D-PTFE-DN125
Seal ring D-PTFE-DN100
Seal ring D-PTFE-DN80
Seal ring D-PTFE-DN75
Seal ring D-PTFE-DN65

SEALTECH VIETNAM

GIỎ HÀNG

LANGUAGE

FANPAGE

HỖ TRỢ TRỰC TUYẾN


HOTLINE
ĐT: 0946 265 720
Email: info@sealtech.com.vn

Ms. Nhi
ĐT: 0913 914 018
Email:

Mr. Long
ĐT: 0918 834 615
Email:

LƯỢT TRUY CẬP

Đối tác